NAGYS AUDIO, Inc.
2207 W Grove Ave.
Waukegan, IL 60085
United States

    Congratulations! You have purchased the best audio XLR interconnect cables in the world! 
    Hundreds of hours have been spent on development and research to bring absolute state of 
    the art technology in cable design for extremely high end audio systems. Please take 
    a moment to read the following precautions. 

    CABLE ORIENTATION:      

    - All audio signals are AC (alternating current). NAGYS AUDIO uses a 2 conductor coax cable, 
       where the shield is attached at both ends. It has no load resistor (i.e. RF cables), or filter 
      capacitor (to prevent hum in improperly manufactured, or grounded equipment). There is 
      virtually no cable directionality. 

    TECHNICAL DATA:      

    - Minimum inner bend radius 2.0 inches.
    - When disconnecting, always pull on the connector and not the cable.
    - The connector parts are glued together with extremely hard epoxy. Any attempt to 
      disassemble them will result in a broken connector and ruined cable geometry for 
      the pressure fit. THIS WILL NOT BE COVERED UNDER WARRANTY.
    - Optimal sonic results should be achieved after 50 hours of burn-in period.
     
    WARRANTY:
 
    - 1 YEAR PARTS AND LABOR FROM THE DATE OF PURCHASE. ANY WARRANTY REPAIR
      MUST BE ACCOMPANIED BY A SALES RECEIPT.