The most important part in an XLR audio interconnect is the cable itself!

    Cables are critical components in a high end audio system and should be 
    judged as such. We at NAGYS AUDIO have selected the highest quality  two
    conductor coaxial cable in the world. 

    It offers the best balance of electrical and mechanical performance under 
    extreme conditions. 

    It is manufactured in a state of the art, multi million dollar facility in 
    United States, under strict ISO9001 and military MIL-1-45208 specifications.

    This is a special low noise microwave frequency coax cable for extremely
    small signal integrity, developed for precision testing and measurement
    instrumentation. 

    It is widely used in the aerospace and military industries for ground, sea and 
    airborne defense systems and sold regularly Lockheed Martin.

    NASA also uses this cable for their most critical spaceflight applications.
 
    It is capable of passing signals up to 18 GHz! This is necessary to keep the
    audio range in phase at all frequencies. 

    The dynamic range and extremely low noise floor for audio signals is 
    unmatched. 

    These are the fastest cables for audio applications ever made.


  Necessity of Ultra Bandwidth Cables For Audio Applications

    To reproduce a 20,000Hz signal with zero phase and time distortion, the implied 
    frequency is approximately 2MGz. 

    To reproduce a 100,000Hz signal (TRUEHD, DTS-HD (Master Audio), SACD, 
    DVD Audio) the implied frequency is somewhere around 10GHz! 

    However this is all with just passing one tone. Music is a mixture of many 
    different frequencies, the harmonics can reach into the GHz range even for 
    normal 16-Bit/44.1kHz recorded audio CD's.

    If the cable is not capable of passing such high frequencies, they begin to 
    reflect. This reflection causes an avalanche effect down the frequency range,                  

    ruining the correct phase and time alignment in the audible range of 20Hz-20,000Hz.

    What differentiates live music and recorded music is the transient response 
    and dynamic range. The human ear is very sensitive, that is why it's so easy to 
    tell a recording from the live performance. 

    To reproduce transients and dynamics in music with lifelike quality, the signal 
    must have zero time and phase distortion. 

    NAGYS AUDIO cables will shock listeners in how lifelike the music will sound.

  Construction:

  - Extremely flexible design
  - Silver plated high purity (multi-strand) copper inner conductors (2)
  - Low density microporous PTFE (Teflon) dielectric
  - Silver plated high purity copper round braid shield, to protect against
    EMI (electro-magnetic interference)
  - FEP Wrap (Teflon) jacket

  Specifications:

  - High frequency applications
  - Low attenuation
  - Shielding effectiveness (dB) >90
  - Frequency (GHz) DC-18
  - Impedance (ohms) 50

  Construction:

  - Manufactured in a state of the art, multi million dollar facility in       
    United States, under strict ISO9001 and military MIL-1-45208 
    specifications
  - Finished with a premium Techflex sleeve, for luxurious look and feel     
  - Techflex is extremely flexible, has high strength and resistance to abrasion 

  Neutrik Connector Specifications:

  - The standard by which all high quality XLR's are judged
  - Metal alloy body
  - Silver plated conductors for ultra low resistivity and long term reliability
  - Soldered using special eutectic 63/37 solder, specifically designed
    for precision electronics
  - Made in Liechtenstein

  Manual:

       XLR Audio Interconnects